Password de Cisco Catalyst 1900 Series [Archivo] - Ay ve vos!

Edward

12-may-2005, 20:18

Alguien sabe como puedo recuperar el password de un switch cisco catalyst 1900 series?

Assign IP Information
Contact your system administrator for the switch IP information, and record it here.
Switch IP address:

Subnet mask:

Default gateway:

1. After POST completes, the Management Console Logon Screen appears on your terminal, PC, or laptop. Enter the [I] IP Configuration option from this logon screen.
Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc. 1993-1999
All rights reserved.

Standard Edition Software
Ethernet address: 00-E0-1E-7E-B4-40

PCA Number: 73-2239-01
PCA Serial Number: SAD01200001
Model Number: WS-C1924-A
System Serial Number: FAA01200001
---------------------------------------

User Interface Menu

[M] Menus
[I] IP Configuration
[P] Console Password

Enter Selection: I

The IP Configuration Menu appears.
2. Enter the [I] IP address option from the IP Configuration Menu.
Catalyst 1900 - IP Configuration

Ethernet Address:00-E0-1E-7E-B4-40

-------------Settings------------------
[I] IP address
[S] Subnet mask
[G] Default gateway
[B] Management Bridge Group
[M] IP address of DNS server 1
[N] IP address of DNS server 2
[D] Domain name
[R] Use Routing Information Protocol
-------------Actions-------------------
[P] Ping
[C] Clear cached DNS entries
[X] Exit to previous menu

Enter Selection: I

3. The following prompt appears:
Enter administrative IP address in dotted quad format (nnn.nnn.nnn.nnn):

Current setting ===> 0.0.0.0
New setting ===>

If the switch does not have an IP address, the Current setting appears as 0.0.0.0, and you can enter the IP address of the switch as the New setting. If the switch is connected to a network that has a Dynamic Host Configuration Protocol (DHCP)/Bootstrap Protocol (BOOTP) server, the server might automatically assign an IP address.
4. If you plan to assign a subnet mask and default gateway, use the [S] Subnet mask and [G] Default gateway options from the IP Configuration Menu.
Assign a Password
1. From the IP Configuration Menu, enter the [X] Exit option to again display the Management Console Logon Screen.
---------------------------------------

User Interface Menu

[M] Menus
[I] IP Configuration
[P] Console Password

2. Enter the [P] Console Password option from this screen. Enter a 4- to 8-character password, and verify as prompted. This password is an unencrypted privileged password that controls switch access.
3. Press any key to return to the Management Console Logon Screen.
The switch is designed to operate with little or no user intervention. In most cases, you can use it with its default settings as soon as you assign it an IP address and password.
To change the switch configuration and to monitor network conditions and statistics, you can use the management console menus or use the web-based Catalyst 1900 Switch Manager from anywhere on your intranet. If the switch is running the Cisco Catalyst 1900/2820 Enterprise Edition Software, you can also use the command-line interface (CLI).
The following section describes how to access the Catalyst 1900 Switch Manager home page. For information about using the management console menus or the Catalyst 1900 Switch Manager, refer to the Catalyst 1900 Series Installation and Configuration Guide. For information about the CLI, refer to the on-line Catalyst 1900 Series and Catalyst 2820 Series Command Reference.

Display the Catalyst 1900 Switch Manager Home Page

After you assign an IP address and password to the switch, you can display the Catalyst 1900 Switch Manager. The Switch Manager supports the following platforms and network browsers:
Operating System Minimum Operating System Requirements Netscape Communicator Microsoft Internet Explorer
Windows 95 Service Pack 1 4.5, 4.51, or 4.61 4.01a or 5.0
Windows 98 Second Edition 4.5, 4.51, or 4.61 4.01a or 5.0
Windows NT 4.0 Service Pack 3 4.5, 4.51, or 4.61 4.01a or 5.0
Solaris 2.5.1
or higher SUN-recommended patch cluster for the OS and Motif library patch 103461-24 4.5, 4.51, or 4.61 Not supported

________________________________________
Note Netscape Communicator version 4.60 is not supported.
________________________________________
To display the Switch Manager home page, start Netscape Communicator or Microsoft Internet Explorer, and configure the browser options needed to communicate with the switch
Configuring Netscape Communicator (All Versions)
1. From the menu bar, select Edit>Preferences.
2. In the Preferences window, click Advanced.
3. Select the Enable Java, Enable JavaScript, and Enable Style Sheets check boxes.
4. From the Advanced drop-down list, click Cache.
5. Click the Every time radio button.
6. Click OK.
Configuring Microsoft Internet Explorer 4.01a
________________________________________
Note For procedures on how to configure Microsoft Internet Explorer 5.0, refer to the Catalyst 1900 Series Installation and Configuration Guide.
________________________________________
1. From the menu bar, select View>Internet Options.
2. In the Internet Options window, select the Advanced tab.
3. Scroll through the list of options to Java VM, select the Java JIT compiler enabled and Java logging enabled check boxes. Click Apply.
4. In the Internet Options window, select the General tab.
5. In the Temporary Internet Files section, click Settings.
6. In the Settings window, click the Every visit to the page radio button, and click OK.
7. In the Internet Options window, select the Security tab.
8. In the Zone drop-down list, select Trusted Sites Zone, and click Custom.
9. Click Settings....
10. In the Security Settings window, scroll to the Java>Java permissions section, and select the Custom radio button.
11. Click Java Custom Settings..., which appears at the bottom of the window.
12. In the Trusted Sites Zone window, select the Edit Permissions tab.
(a) If the buttons under Run Unsigned Content are not available, return to the Security Settings window, and select either Medium or Low safety in the Reset Java Permissions list box. Click Reset.
(b) Under Run Unsigned Content, select the Enable radio button, and click OK.
13. In the Security Settings window, click OK.
14. In the Internet Options window, select the Security tab, and verify that the Zone drop-down list is set to Trusted Sites Zone.
15. In the Trusted Sites Zone section, click Add Sites....
16. In the Trusted Sites Zone window, deselect the Require server verification check box.
17. In the Add this Web site to the Zone field, enter the IP address of the switch.
________________________________________
Note If the switch will be a member of a cluster, you only need to enter the address of the cluster command switch. Refer to the documentation for the cluster command switch for more information.
________________________________________
18. Click Add, and then click OK.
19. In the Internet Options window, click OK.
Display the Switch Manager Home Page
When the browser is configured, display the Catalyst 1900 Switch Manager home page as follows:
1. Enter the IP address of the switch in the Location field if you are using Netscape Communicator (the Address field if you are using Microsoft Internet Explorer), and press Return.
2. Enter the switch password assigned through the console menu (see "Assign a Password" in the previous section). At the prompt, click OK.
The Catalyst 1900 Switch Manager home page is displayed.

You can use the Switch Manager to change the switch configuration and to monitor switch conditions and statistics from anywhere on your intranet.

:hambre: